Student Achievements

2020

2019

• S Suraje, Joshuajeshmilon L, Nitheeshkumar C, Divagar M presented a research paper “Analysis of Mechanical and Thermal Insulation Properties of Bamboo Mineral Wool Reinforced Composites” in International Conference on Material Science and Mechanical Engineering (ICRPMSME2021) “Jointly organized by Government engineering college, Gandhinagar, Gujarat and Government engineering college, Patan, Gujarat on 28-29 May 2021
• Heyram G, Mohamed Mubasil K, Guruparan M, Yugesh P presented a research paper “Experimental Analysis of Mechanical Properties of Bamboo E-Glass Reinforced Composite” in International Conference on Material Science and Mechanical Engineering (ICRPMSME2021) ” Jointly organized by Government engineering college, Gandhinagar, Gujarat and Government engineering college, Patan, Gujarat on 28-29 May 2021
• K.S. Thirumani presented a research paper “Experimental Study on Fracture toughness and fatigue crack growth characteristics of Al/TiB2 MMCs, ” in International Conference on Advanced Materials  Behavior & Characterization (ICAMBC_2021)– Organised by Mattest Research Academy, Chennai, Tamilnadu on 24-26, April 2021
• M. Manikandan, M. Kamal raj, K. Banupriya presented a research paper “Mechanical Properties of Aluminium based In-situ formed Metal Matrix Composites, ” in International Conference on Advanced Materials  Behavior & Characterization (ICAMBC_2021)– Organised by Mattest Research Academy, Chennai, Tamilnadu on 24-26, April 2021
• Ms. K.Banupriya Mechanical IV year had participated ANNA UNIVERSITY ZONAL ATHLETIC MEET 2020-21 and Her Secured RUNER in BADMITON, organised by ANNA UNIVERSITY SPORT BOARD , CHENNAI.
• Ms. R.Vaishali Mechanical II year had participated 30th Junior National Throw ball  Championship 2021 and Her Team Secured 3rd position in Throw Ball held on 19 to 21st March, 2021, organised by Federation of India, Chhattisgarh Pradesh Throw Ball Association.
• Ms. R.Vaishali Mechanical II year had participated National Level Sports Meet 20-2021 and won the 1st Place in Throw Ball under age group 19 held on 21st to 23rd Feb, 2021, Organized by SSCAF I.R.O.A & SSCAF.Uttar Pardesh .
• TNSI (Tamil Nadu Student Innovators) is a flagship programme which identifies the student innovators and rewards them to build a Minimum Viable Product to convert their ideas into a Start-Up. Mechanical IV year Mr. Mohamed Mubasil has been participated and him secured top first 25 out of 520 teams, and got selected Stage 3 progress held on 21 Jan, 2021
• Ms K.Banupriya, Mr.M.Manikandan, Mr.K.Rajesh kannan of final year had presented a paper titles “Lean thinking in manufacturing with respect to quality” and won BEST PAPER AWARD in the National level virtual conference on “Recent Advances in Materials and Manufacturing” held at Karpaga Vinayaga College of Engineering and Technology held on 09-01-2021

• Mr. V.Surez, Mr. G.Heyram, Mr. K Mohamed Mubasil had presented a paper titles “Analysis of TiO₂ as a Nanomaterial in the fields of Medicine, Cosmetics & Food – A Review” in the virtual International Conference on “Advanced Technologies and Research in Mechanical Engineering” held during 26th to 28th October 2020. The paper is under Review in Journal of Advanced Engineering Research.
• Akash M of III year Mechanical Engineering participated in “MECHFEST ” – Welding  won 2nd Prize, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• Manick Karthik C, Dharmaraj  P, Loganathan M  of III year Mechanical Engineering participated in “MECHFEST ” –Aqua Missile won 2nd Prize, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• Anandha Kumar  M of III year Mechanical Engineering participated in “MECHFEST ” –Aqua Missile won 1st Prize, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• Yogeswaran  K of III year Mechanical Engineering participated in “MECHFEST ” – Welding, CAD Modeling, Aqua Missile won 1st Prize, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• Lognathan  S, Manick Karthik C of II year Mechanical Engineering participated in “MECHFEST ” – Invistigation of mechanical properties of flyash reinforced AMMC using  Stir casting Method, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• Dharmaraj P of II year Mechanical Engineering participated in “MECHFEST ” -Design and fabrication of railway track cleaning equipment, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020
• Akash M , Subash M of II year Mechanical Engineering participated in “MECHFEST ” – Performance and Emission test of single cylinder diesel engine using bio- diesel at various compression ratio, Organised by Alagappa Chettiar Government College of Engineering and Technolgy, Karaikudi  on 26th Feb 2020.
• M Kamalraj, K Mohammad mubasil, M.Hariprasath, G Heyram of III year Mechanical Engineering participated in One day workshop on Electric vehicle, Organised by Alagappa Chettiyar Government college of Engineering and Technology, Karaikudi on 27/02/2020.
• V.Suraje, R.Saravanan, of III Year  Mechanical Engg. “A  Solar cell efficiency” Paper presented a in Green Chemistry and engineering towards future technology,  Department of Chemical Engineering, Annamalai University, Chidambaram, 31/01/2020 & 1/2/2020.
• Surya k , Vijayabalan K,Dharmaraj P , Harish Nataraajan K II year Mechanical Engineering students has presented the paper entitled “AUTOMEET 2020” “Modeling and Fabrication  of Wheelchair for Patients and Disable Persons” in Madras Institute of Technology (MIT) , Chennai on 24^th and 25^th Jan 2020.

• Ms. K.Banupriya Mechanical III year had participated ANNA UNIVERSITY ZONAL ATHLETIC MEET 2019-20 and Her Secured 3rd position in Discuss Throw  held on 17 to 18  Oct, 2019, organised by ANNA UNIVERSITY SPORT BOARD , CHENNAI.
• Ms. K.Banupriya Mechanical III year had participated ANNA UNIVERSITY ZONAL ATHLETIC MEET 2019-20 and Her Secured 3rd position in BADMITON  held on 20 Oct, 2019, organised by ANNA UNIVERSITY SPORT BOARD , CHENNAI.
• Hemanth Raj Pk, Dharmaraj P, Harish Nataraajan K  II Mechanical Presented Paper in Symposium , Conducted  kongunadu college of engineering and technology , Trichy on August 2019
• N Mohammed Hasan, A Immanuel Arul Raja, Muthukumar J (A.P/ Mech ) authored a Paper and presented in “CONFCALL 19” an ISTE sponsored Conference on “Innovative trends in Future Engineering and Technology ” – “Plastic Road” – 29th and 30th September.
• Suraje V had participated in YUVA Leadership Conclave (Sep 06 to Sep 08 )  and won “Best Impact Team Award” with his team members from other colleges.More than 120 students participated in this event.
• JOSHUAJESHMILON ID had participated in YUVA Leadership Conclave (Sep 06 to Sep 08)   and won “Best Leadership award” with his team members from other colleges.More than 120 students participated in this event.
• NitheeshKumar C, SaravananKumar B presented a paper in ( YANTRA UTSAV 2019 – 07.09.2019 ) at M.A.M college of Engineering  and won FIRST Prize and bagged a cash prize of Rs.1000.
• MOHAMED MUBASIL, NITHEESHKUMAR C,  RAJESH KANNAN K, SURAJE V, YOGARAJAN G,  YUGESH P , JOSHUAJESHMILON ID , MANIKANDAN M, POOBALAN M, PRASANNA KUMAR S of III Mech  has underwent inplant training at S SALEM STEEL PLANT during 10-06-2019 T0 22-06-2019
• MOHAMMED IRFAN, MARIA JACK, SRIRAM, SARAVANAN, MOHAMMED HASSAN, SHARMAL SOLIGIAN, MURALIDHARAN of IV Mech  has underwent inplant training at S SALEM STEEL PLANT during 10-06-2019 T0 22-06-2019
• NitheeshKumar C , SaravananKumar B and Karuppasamy A (A.P/CARE) authored a Paper and presented in “CONFCALL 19” an ISTE sponsored Conference on “Innovative trends in Future Engineering and Technology” – 29th and 30th September.
• Heyram G presented a paper at Rover Engineering college at Green Chemistry and Bagged I Prize.
• Hemanth Raj Pk, Dharmaraj, Harish Nataraajan K  II Mechanical Presented Paper in Symposium , Conducted  kongunadu college of engineering and technology , Trichy on August 2019.
• N Mohammed Hasan, A Immanuel Arul Raja IV Mechanical  engineering students participated  SIH2019 finals to conducted in the Indian Institute of Science Education and Research, Pune . July 2019.
• S.Karthik  of II Year PG Mechanical Engg. “Experimental Analysis on Laminated Composite Plate Reinforced with kans grass fiber and Egg Shell Powder ” Paper presented a in St.Joseph’s Institute of Technology , 05-04-2019.
• P.Dineshkumar  of II Year PG Mechanical Engg. “Experimental Analysis on Laminated Composite Plate Reinforced with kans grass fiber and Egg Shell Powder ” Paper presented a in St.Joseph’s Institute of Technology , 05-04-2019

• K.Banupriya, G.Heyram P.Yugesh of II Mech has underwent inplant training at Diesel loco shed- Ponmalai from 03/12/2018 to 16/12/2018.
• D.Gokul of III Mech has underwent inplant training at Port of Chennai during the month of December 2018.
• S.Sivabalaji, T.Pragadeeshwaran of III Mech has underwent inplant training at NSIC- Chennai from 10/12/2018 to 16/12/2018.
• T.Pragadeeshwaran of III Mech has underwent inplant training at Banglore Aircraft Pvt.Ltd during the month of December 2018.

•  Sailaesh kiran U marath and Ramkumar.V of III mech B has underwent inplant training at Diesel loco shed- ponmalai during 20/6/2016- 30/6/2016

•  Satish kumar.N of III Mech B has underwent inplant training at Harihar Alloys (p) Ltd during 12/12/2016-17/12/2016

• Arockiya Saloman Raj, Balaji, Porkumaran, Prabhu of IV year Mechanical Engineering has won first place in YUSTART: CII STARTUP CHALLENGE held in the month of September 2015.

• P. Chandrasekran of IV year Mechanical Engineering has secured fourth place in team event 60km and eigth place in team event 120km in a cycling championship held in Punjab University in the month of September 2015.

• P. Chandrasekran of IV year Mechanical Engineering has secured first place in interzonal cycling road championship, conducted by Anna University in the month of September 2015.

• K. Karthik of III year Mechanical Engineering has donated blood in a blood camp conducted by Friends Blood Bank on July 23 2015.

• K. Karthik and S. Atchaya of III year Mechanical Engineering won third prize in MECH MINDS at ” TORQ 2K15″, conducted by Loyola-ICAM College of Engineering and Technology on July 25 2015.

• S. Atchaya of III year Mechanical Engineering attended a Workshop on ANDROID App Development, conducted by Uniq Technologies on May 24 2015.

• S. Gowri Shankar of III year Mechanical Engineering attended a National level workshop on Non Destructive Testing, conducted by Indra CARE group of Institutions, Trichy on September 24 2015.

• Umar Farook and Vinoth raja of IV year Mechanical Engineering won first prize in paper presentation, conducted by Periyar Maniammai University on September 29 2015.

• Umar Farook and Vinoth raja of IV year Mechanical Engineering won first prize in paper presentation, conducted by Kings College of Engineering on September 18 2015.

• Hariprasath and Maheswaran of IV year Mechanical Engineering participated in interzones Badminton Tournament, conducted by Anna University in the month of September 2015.

• Hariprasath and Maheswaran of IV year Mechanical Engineering participated won first prize in zonal level badminton, conducted by Anna University in the month of August 2015

• S. Arivazhan of II year Mechanical Engineering participated in Photography contest, conducted by Pondicherry Engineering College, Pondicherry on September 15 2015.

• S. Arivazahanof II year Mechanical Engineering participated in Photography contest, conducted by Saranathan College of Engineering, Trichy on September 4 2015.

• B. Karthik of II year Mechanical Engineering participated in speech competition, conducted by Indra Ganesen College of Engineering, Trichy on September 1 2015.

• T. Gowthaman of II year Mechanical Engineering participated in poetry competition, conducted by Indra Ganesen College of Engineering, Trichy on September 1 2015.

• R. Sharon Denis Royof II year Mechanical Engineering participated in National symposium, Cython conducted by Nehru Group of Institutions, Coimbatore on March 12 2015.

• C. Vasanthanof II year Mechanical Engineering attended workshop on “Car manufacturing and design”conducted by Madras Institute of Technology, Chennai on March 01 2015.

• N. Sai Savith of III year Mechanical Engineering Participated in National symposium, Pragyan conducted by National Institute of Technology, Trichy on February 28 2015.

• C. Vasanthan of II year Mechanical Engineering Participated in National symposium, Meqnzo’ 15 conducted by Valliammai Engineering College, Chennai on February 28 2015.

• B. Prasanna Venkatesan of II year Mechanical Engineering attended a workshop on “Non destructive testing” conducted by Madras Institute of Technology, Chennai on February 20 2015.

• S. Gowrishankar, Jones Tensingh and M. Hariharan of II year Mechanical Engineering participated in National symposium, Mechtrotz’ 15 on February 17 2015 conducted by Karpagam University, Coimbatore.

2014

• M. Durgalakshmi of II year Mechanical Engineering attended a short term course on “Application of Solid works” conducted by Advanced Training Institute, Chennai during December 2014.

• M. Durgalakshmi and S. Atchaya of II year Mechanical Engineering attended workshop on “Regulated and Unregulated engine emission and its control techniques” conducted by Velammal Engineering College during September 2014.

2012

• Mr.G.Kapilash, A.Vetrivel, K.Sriram & A.Venkatesh of II Year Mechanical Engg. exhibited their project in the techfest conducted at Star Lion College of Engineering & Technology, Thanjavur during 24-25 Jan 2012.

• P.Ashok, Mohamed Shameem and P.Subramanian of III Year Mechanical Engg. presented a paper in the national annual technical fest at BITS- PILANI , Hyderabad campus during February 20-21,2012.

• Marcell Christ and S.Vignesh of III Year Mechanical Engg. presented a paper in the national annual technical fest at BITS- PILANI , Goa campus during February 03-05,2012.

• Caleb Sagai and Ravishankar of III Year Mechanical Engg. presented a paper in the CSIR sponsored conference organized by Roever College of Engineering and Technology, Perambalur during Feb 16-17, 2012.

• P.Ashok and Mohamed Shameem of III Year Mechanical Engg. presented a paper in the CSIR sponsored conference organized by Roever College of Engineering and Technology, Perambalur during Feb 16-17, 2012.

• Vetrivel, R.Vignesh, Santhoshkumar and Kudalingam of II Year Mechanical Engg. attended two days workshop on “Self Balancing Robot” conducted by College of Engineering – Guindy, Chennai during Jan 30-31, 2012.

• Vetrivel, R.Sathish, Santhoshkumar and Kudalingam of II Year Mechanical Engg. attended one day workshop on “IC Engines” conducted by NIT-Trichy on 26^th February 2012.

• Ten students of II Year Mechanical Engg. attended a workshop on “Total Quality Management conducted by Anna University, Trichirappalli during October 2012.

2011

• Marcell Christ and S.Vignesh of III Year Mechanical Engg. presented a paper in the students symposium organized by NIT-Trichy during September 2011.

• M.Vishnukumar, C.Vinodkumar, Marcell Christ and S.Vignesh of III Year Mechanical Engg. presented a paper in the national students symposium organized by VIT, Vellore during 18^th September 2011

• M.Vishnukumar, Marcell Christ and S.Vignesh of III Year Mechanical Engg. presented a paper in the national student symposium organized by SASTRA University, Thanjavur during October 2011.

• R.S.Prakash, N.Ramkumar, D.Rajasekar and B.Venkatesh of II Year Mechanical Engg. attended two days workshop on “Automobile Engineering” conducted by Kongu Engineering College during October 2011.

• D.Anand, Caleb Sagai, Mohamed Shameem and L.Ravishankar of III Year Mechanical Engg. undergone in-plant training at TNSTC,Trichy.

• C.Vinodkumar, S.Vinoth, R.Anandan, P.Gurumoorthy and G.Sudalaimani of III Year Mechanical Engg. undergone in-plant training at Tuticorin Thermal Power station,Tuticorin

• K.Sriram of II Year Mechanical Engg. undergone in-plant training at Tata Motors service station, Dindigul.

• R.Vignesh of II Year Mechanical Engg. undergone in-plant training at Titan Industries, Hosur

• A.Stalin of II Year Mechanical Engg. undergone in-plant training at BMW Plant, Chennai

• R.Sathish of II Year Mechanical Engg. undergone in-plant training at Hero Honda authorized dealer, Trichy.

• Luckas, Sivaram and Praveen kumar of II Year Mechanical Engg. undergone in-plant training at Rane TRW, Trichy.

• Nikhil Bhonsle and Kapilashof II Year Mechanical Engg. undergone in-plant training at TVS-Ashok Leyland service station, Trichy.

• Sundarabharathi and Sivaram of II Year Mechanical Engg. undergone in-plant training at Tuticorin Thermal Power station,Tuticorin.

• R.Prakash of II Year Mechanical Engg. undergone in-plant training at EID PARRY India, Trichy

• R.Vikram of II Year Mechanical Engg. undergone in-plant training at Chennai Petroleum Corporation Limited, Nagapattinam

• S.S.Suprajha of II Year Mechanical Engg. undergone in-plant training at Krishna Engg. Company(P) Ltd.,Trichy

• Students of III Year Mechanical Engg. visited Parle G industries, Madurai during 10 ^th January and they were accompanied by Mr.Mareeswaran and R.K.Vittal Rao.