Home » Faculty Achievements

Faculty Achievements

2021  

 

 

  • Mr.J.Muthukumar, Mr.P.Muthukumar and Mr.S.Maheshwaran presented a research paper “Influence of Synthesized Nano Al2O3 in Thermal Conductivity of Ethylene Glycol and Ethylene Glycol Water Mixture Base Fluid for Heat Transfer Applications” in International Conference on Material Science and Mechanical Engineering (ICRPMSME2021) “Jointly organized by Government engineering college, Gandhinagar, Gujarat and Government engineering college, Patan, Gujarat on 28-29 May 2021
  • Mr.J.Muthukumar, presented a research paper “Analysis of Mechanical and Thermal Insulation Properties of Bamboo Mineral Wool Reinforced Composites” in International Conference on Material Science and Mechanical Engineering (ICRPMSME2021) “Jointly organized by Government engineering college, Gandhinagar, Gujarat and Government engineering college, Patan, Gujarat on 28-29 May 2021
  • Mr.J.Muthukumar,presented a research paper “Experimental Analysis of Mechanical Properties of Bamboo E-Glass Reinforced Composite” in International Conference on Material Science and Mechanical Engineering (ICRPMSME2021) “Jointly organized by Government engineering college, Gandhinagar, Gujarat and Government engineering college, Patan, Gujarat on 28-29 May 2021
  • Dr.B. Gobalakrishnan, Dr.D.R. Rajkumarpresented a research paper “Experimental Study on Fracture toughness and fatigue crack growth characteristics of Al/TiB2 MMCs, “ in International Conference on Advanced Materials  Behavior & Characterization (ICAMBC_2021)– Organised by Mattest Research Academy, Chennai, Tamilnadu on 24-26, April 2021.
  • Dr.B. Gobalakrishnanpresented a research paper “Mechanical Properties of Aluminium based In-situ formed Metal Matrix Composites, “ in International Conference on Advanced Materials  Behavior & Characterization (ICAMBC_2021)- Organised by Mattest Research Academy, Chennai, Tamilnadu on 24-26, April 2021.
  • Dr.B. Gobalakrishnanpresented a research paper “Process optimization of radiator core parts” in National  e-Conference on recent development in automobile and mechanical engineering (RDAME’21) on  31st March 2021.
  • Dr.B. Gobalakrishnan,has attended   “6 days STTP on 3D Printing Technology in Biomedical Field for Organ Transplant” Organized by  V.S.B Engineering College, Karur- 639 111nfrom 22.02.2021 – 27.02.2021.
  • Mr.P.Muthukumar,has attended FDP on “Renewable Energy Sources and Future Energy Needs”, Sponsored by TEQIP III  Organized by Madhav Institute of Technology & Science, Gwalior,  from 15 to 19 Feb 2021.
  • Mr.J.Muthukumar, has attended Online  FDP on  “AICTE ATAL.SMART CITIES” Organized by Vellore Institute of Technology,Pune from 01 to 05 Feb 2021
  • Dr.B. Gobalakrishnan,  has attended “AICTE Training and Learning (ATAL) Academy onlline FDP on “Novel Materials” Organized by  All India Council for Technical Education, Nelson Mandela Marg, Vasant Kunj, New Delhi-11 070 from 08.02.2021 – 12.02.2021
  • Mr.P.Muthukumar,has attended FDP on “Empowering the Moral Values, Ethics and Behavioral Attitude in Teaching Skills among Teachers”  Organized by Department of Mechanical Engineering, Government College of Engineering, Bargur during  from 21 to  26 Jan 2020.
  • Mr.P.Muthukumar,has attended FDP on “Welding Technology” Organized by Sri Sairam Engineering College, Chennai  from 06 to 11 Jan 2021
  • Mr.M.THANGA BALAJI,has attended Online  FDP on  “Advanced Technologies in Automotive System” Organized by  karpaga Vinayaga College of Engineering& Techanology from  04 to 08 Jan 2021
  • Mr.P.Manivannan, has attended Online  FDP on  “  Robotics” Organized by Dhanekula Institute of Engineering and Technology from  04 to 08 Jan 2021.
  • Mr.S.Karthik,has attended  “Online FDP – Robotics” Organized by AICTE – ATAL  from 04 to 08 Jan 2021
  • Mr.J.Muthukumar, has attended Online  FDP on  “AICTE ATAL.Online Teaching and Learning Technologies” Organized by Motilal Nehru National Institute of Technology Allahabad,Pune from 04 to 08 Jan 2021
  • Mr.P.Manivannan, has attended Online  FDP on  “Thermal Engineering I” Organized by  Sri Sai Ram Engineering College,Chennai  from 28-12-2020 to 04-01-2021.
  • Dr.B. Gobalakrishnan,published a research Paper on ” Analysis of mechanical properties of cold extruded Al 6061 TiB2 MMCs and validated for finite element analysis” Journal Name: Materials Today: Proceedings , ISSN-2214-7853, Vol No. 43, 2, 1283-1292, 2021, January 2021.
  • Dr.B. Gobalakrishnan presented a research paper “Compare the mechanical properties of cast Al/Graphite and Al/TiB2 Metal matrix composites” in National level virtual conference on recent advances in materials and manufacturing on  09th January 2021.
  • Dr.B. Gobalakrishnan,  Dr.D.R. Raj kumar, Mr.A. Kannan presented a research paper “Analysis of mechanical properties of heat-treated Al/TiB2 MMCs and validated with FEA” in National level virtual conference on recent advances in materials and manufacturing on  09th January 2021.
  • Mr.P.Muthukumar, has attended FDP on “Thermal Engineering-I”  Organized by Sri Sairam Engineering College, Chennai from 28 Dec 2020 to 04 Jan2021

 

2020  

  • Mr.P.Manivannan, has attended Online  FDP on  “Contemporary Research in Manufacturing processe” Organized by Karpaga Vinayaga College of Engineering& Techonology from 22 to 26 Dec2020
  • Mr.P.Muthukumar,  has attended AICTE Sponsored Online Short Term Training Programme (Phase I) on “Hands on Training on MATLAB and Advanced Optimization Techniques”  Organized by Department of Mechanical Engineering, Government College of Engineering, Bargur during  from 21 to  26 Dec 2020.
  • Mr.P.Manivannan,  has attended Online  FDP on  “Advanced Technologies in Automotive system- ATAS 21” Organized by Karpaga Vinayaga College of Engineering& Techonology from 22 to 26 Dec 2020.
  • Mr.S.KARTHIK presented a research paper “Analysis Of Tio 2 as a Nanomaterial in the fields of medicine, cosmetics, food, ” in Virtual International Conference on Advanced Technologies and Research in Mechanical Engineering (VICATRME’20) – Organised by MEA ENGINEERING COLLEGE Malappuram, Kerala , India 679321 on 26 th to 28 th October 2020
  • Mr.P.Manivannan,has attended Online  FDP on  “Embracing the creative side of teaching and learning Methods” Organized by  RMK College of Engineering and Technology from 29 June 2020 to 03 July 2020.
  • Mr.P.Manivannan,  has attended Online  FDP on  “ Dynamics of Machines” Organized by Mohamed Sathak A J College of Engineering from  21 to 23 May2020.
  • Mr.J.Muthukumar,  has attended Online  FDP on  “AICTE ATAL. Mechanical and Manufacturing Engineering” Organized by Vishwakarma Institute Of Information Technology,Pune from 21 to 25 Dec2020.
  • Mr.J.Muthukumar,has attended Online  FDP on  “AICTE ATAL. :3D Printing & Design” Organized by Maharshi Dayanand University Rohtak from 23 to 27 Nov 2020.
  • Mr.J.Muthukumar,has attended Online  FDP on  “Scanning Electron Microscopy and X-Ray Diffractometer.” Organized by Institute of Technology and Engineering,Indus University from 25-29th June 2020
  • Mr.J.Muthukumar, has attended Online  FDP on  “Industry 4.0” Organized by Priyadharshini College of Engineering, Nagpur  from 09 – 11 June 2020.
  • Mr.J.Muthukumar,  has attended Online  FDP on  “Resarch methodoly tools and techniqes(RMTT)” Organized by Priyadharshini College of Engineering, Nagpur from 29 – 02 June 2020.
  • Mr.J.Muthukumar,has attended Online  FDP on  “Advanced NDT Techniques & Applications in Industry” Organized by QISCET, Ongole, Hyderabad from 25 – 29 May 2020.
  • Mr.J.Muthukumar,  has attended Online  FDP on  “Project proposal for finding agency and preparation and submission protocal” Organized by Partician College of Art And Science from 16 – 17 May.2020.
  • Mr.J.Muthukumar,has attended Online  FDP on  “Tools explored in disruptive technologies” Organized by Sri Sai Ram Institutue of Technology from 11 – 16 May 2020.
  • Mr.S.Karthik,  has attended online FDP on “Embracing the creative side of the teaching and learning process” Organized by R.M.K College of Engineering and Technology, Tiruvallur  from 07-05-2020 to 12.5.2020.
  • Mr.S.Karthik, has attended online FDP on Engendering the next generation Educator  Organized by Nehru Group of Institutions, Coimbatore from 23-04-2020 to 28-04-2020.
  • Department of Mechanical Engineering was awarded as “Best Department  ” of the year 2019-2020 in the annual day function.
  • Mr.J.Muthukumar Assistant Professor awarded as “Best Faculty” of the year 2019-2020 in the annual day function.
  • Mr.P.Muthukumar Assistant Professor awarded as “Best Faculty” of the year 2019-2020 in the annual day function.
  • Mr.D.R. Rajkumar, published a research on ” Influence of Mechanical Properties on Modal Analysis of Natural Fiber Reinforced Laminated Composite Trapezoidal Plates” Journal Name: Journal of Natural Fibers , ISSN-1544-0478, February 2020.

 

2019  

  • D.R.Rajkumar attended Faculty Development Program on “Nonlinear Analysis in Earthquake Engineering ” conducted by IISC, Bangalore  on 25-11-2019 to 29-11-2019
  • D.R.Rajkumar presented Guest Lecture on FEA in Anjalai-Ammal Mahalingam Engineering College, Kovilvenni, Thiruvarur on 24-10-19.
  • Mr.C.NitheeshKumar ,Mr.B.SaravananKumar and Mr.A.Karuppasamy(A.P/CARE) authored a Paper and presented in “CONFCALL 19” an ISTE sponsored Conference on “Innovative trends in Future Engineering and Technology” – 29th and 30th September.
  • Mr.N.Mohammed Hasan , Mr.A Immanuel Arul Raja  and Mr.J.Muthukumar (A.P/CARE)authored a Paper and presented in “CONFCALL 19” an ISTE sponsored Conference on “Innovative trends in Future Engineering and Technology” – 29th and 30th September.
  • Department of Mechanical Engineering  and DST-NIMAT jointly organizing an three days (Sep 26 to 28, 2019 ) Entrepreneurship Awareness Camp for young entrepreneurs.Program coordinator :Mr.J.Muthukumar (AP/Mech).
  • Mr.D.R. Rajkumar obtained Ph.D degree from ANNA UNIVERSITY, Chennai
  • N Mohammed Hasan, A Immanuel Arul Raja IV Mechanical  engineering students under guidance of Mr.J.Muthukumar (A.P/CARE)  participated SIH2019 finals to conducted in the Indian Institute of Science Education and Research, Pune. July 2019
  • Mr.T.Vasanthakumar attended Seminar Program on “Biomaterials & 4D Printing in Health care:Innovative and Emerging Trends” conducted by Bannari Amman Institute of Technology on    20-06-2019 & 21-06-2019
  • Mr.A.karuppasamy attended Faculty Development Program on “Students Induction Programme” conducted by Psg Institute of Technology, Coimbatore on 13-06-2019 to 15-06-2019.
  • Mr.D.R. Rajkumar, published a research on ” Optimization of free vibration analysis on structural plates of fiber reinforced laminated composites” Journal Name: International Journal of Rapid Manufacturing , ISSN-1757-8817, Vol No. 8, Issue No. 1-2, January 2019.
  • Dr.R.Ganesh presented a research paper “Air gasification of 75% – 25% Rice Husk- Coir Pith Sawdust biomass mixture in self circulating Fludized Bed Gasifier ” in ICBEST-2019- International Conferences.
  • Mr.R.Ganesh obtained Ph.D degree from ANNA UNIVERSITY, Chennai.
  • D.R. Rajkumar presented a research paper “Material Characterization and Modal Analysis of Natural Fiber Reinforced Laminated Composite Trapezoidal Plates” in ICBEST-2019- International Conferences.
  • D.R. Rajkumar presented a research paper “Modelling and Kinematic Analysis of Mechanically Operated Sand Scooping Machine” in INDUSTRY 4.0- International Conferences conducted by CIT, Coimbatore.

 

2018  

  • Mr.A.Karuppasamy presented a research paper “Performance analysis of Diesel engine by varying its nozzle holes” in Cutting Edge Innovations in Engineering- International Conferences.
  • D.R. Rajkumarpresented a research paper “Structural Analysis on Piston used in Four Stroke Bike Engine” in ICMMSC-2018- International Conferences conducted by SSN College of Engineering, Chennai.
  • D.R. Rajkumarpresented a research paper “Design and Stress Analysis of Four Wheeler Disc Brake Made of Metal Matrix Composites” in ICMMSC-2018- International Conferences conducted by SSN College of Engineering, Chennai.
  • Mr.A.Karuppasamy participated in  “Short Term Course on Thermoelectric Materials” organized by IISC, Bangalore QIP.
  • D.R. Rajkumar participated in  “Aero Engines & Air Frames” seminar organized by Kings College of Engineering.

 

2015

  • Mr. S. Ramanthan, Mr. S. Palanisamy, Mr. R. Naveen Kumar published a research on ” Design and Analysis of Modified Carburettor using CFD” Journal Name: International Journal of Advances in Engineering Research, e-ISSN: 2231 – 5152,P-ISSN-2454-1796, VOL 10, ISSUE 5, NOV 2015.
  • Mr. D.R. Rajkumar attended Faculty Development Program on “Recent trends in Automobiles” conducted by Indian Institute of Technology, Chennai on February 2 2015.
  • Dr. A. Pradeep, Mr. K.S. Babulal and Mr. P. Muthukumar published a research paper on “Experimental performance and emission analysis of CI Engine fueled with bio-diesel”. Journal name : International Journal of innovative research in science, engineering and technology, 2319-8753, 4.2.134-138,Feb2015.
  • Dr. A. Pradeep, Mr. K.S. Babulal and Mr. I. Vimalkannan published a research paper on “Comparative study of stress analysis on notched plates between analytical and finite element solutions “. Journal name:International Journal of current research and academic review, 2347-3215, 3,1.144-154, Jan2015.
  • Mr. A. Pradeep obtained Ph.D degree from National Institute of Technology, Trichy.

2014

  • Mr.N.Saiprasanna published a research paper on “Integrated performance measurement techniques in supply chain review” in an international conference, Trends in design and manufacturing  conducted by National Institute of Technology, Trichy on December 08 2014.
  • Mr.N.Saiprasanna  attended seminar on “Recruiting the best batch” organised by CII at Hotel Sangam, Trichy.
  • Mr.N.Saiprasanna and Mr. A. Thangapandian attended workshop on “How to write research article?” conducted by Knowledge Institute of Technology, Salem on August 24 2014.

2012

  • Mr.N.Saiprasanna attended two days workshop on “Manufacturing and Supply Chain Solutions” conducted by KLN college of Engineering, Madurai during 10-11 February 2012.

2011

  • Mr.K.Karunamurthy presented a paper titled “ Experimental studies on heat transfer augmentation in pilot solar ponds” in the international conference on advances in energy research conducted by IIT Bombay during 09-12 December 2011
  • Mr. N. Sai Prasanna, Assistant Professor presents a technical paper titled “A model for selection of best third party reverse logistics provider in Supply Chain Management” in the international conference conducted by SVNIT, Surat in association with Indian Institution of Industrial Engineering, Navi Mumbai on 17.11.2011.
  • Mr.N.Saiprasanna presented a paper titled”Selection of best third party in reverse logistics using AHP” in the international conference on Industrial Engineering conducted by SVNIT,Surat during 23-25 November 2011.
  • Mr. M. Mareeswaran presented a paper titled “Design and Manufacturing of Supersonic Steam Tunnel”, International Conference on Operational Excellence for Global Competitiveness, ICOEGC-2011, February 03-05, 2011, R.V. College of Engineering, Bangalore, India
  • Mr.D.R.Rajkumar & Mr.V.Balakrishnan presented a paper on “Model analysis of a rectangular plate” in the in-house technical symposium
  • Mr.K.Karunamurthy attended one week national workshop on “Hydraulics and Pneumatics” conducted by NIT Calicut during June 2011.
  • Mr.D.R.Rajkumar attended a one day workshop on “Research Methodology” organized by Anna University , Trichirappalli.
  • Mr.D.R.Rajkumar registered his Ph.D. at Anna University of Technology, Madurai and completed his course work during December 2011.
  • Mr.R.Ganesh registered his Ph.D. at Anna University of Technology, Tiruchirappalli during July 2011
  • Mr.N.Saiprasanna & Mr.V.Balakrishnan underwent “Mission 10X” programme of WIPRO Technologies at SASTRA University during 06-10 June 2011
  • Mr. K. Karunamurthy delivered a special lecture on Thermodynamics at Fatima Michael College of Engineering & Technology, Madurai on 10.10.2011
  • Mr. K. Karunamurthy is the reviewer for the books published on Operations Research for Tata McGraw Hill Publishing Company.
  • Mr. K. Karunamurthy is the reviewer for the books published on Thermodynamics and Thermal Engineering for Oxford University Press.
  • Mr. K. Karunamurthy is the reviewer for the International Journal of Oil, Gas & Coal Technology.
  • Mr. K. Karunamurthy is the reviewer for the International Journal of Green Energy.
  • Mr.N.Saiprasanna has become a corporate associate member in Indian Institution of Industrial Engineering, NaviMumbai and attached to BHEL, Trichy chapter

2010

  • Mr. M. Mareeswaran presented a paper titled “Design and Fabrication of Supersonic Wind Tunnel Under Different Operating Conditions”, 16th ISME Conference on Mechanical Engineering for Sustainable Development, ISME, December 02-04, 2010, Indian Institute of Technology Delhi, New Delhi, India
  • Mr. M. Mareeswaran presented a paper titled “Design and Fabrication of Supersonic Wind Tunnel using Optimization Techniques” in the International Conference on Production & Industrial Engineering, CPIE 2010, December 03-05, 2010, Dr. B R Ambedkar National Institute of Technology Jalandar, Punjab, India.
  • Mr. M. Mareeswaran presented a paper titled “Analysis and Design of Supersonic Wind Tunnel”, National Conference on Forensic Technologies in Mechanical and Industrial Engineering, AFTMIE-2010, November 12-14, 2010, Ganpati Institute of Technology & Management, Bilaspur, Yamuna Nagar, Haryana, India
  • Mr. M. Mareeswaran presented a paper titled “Analysis of an Aerofoil in Supersonic Steam Tunnel”, National Conference on Advances in Mechanical Engineering, March 30, 2010, Anjalai Ammal Mahalingam Engineering College, Kovilvenni, Tiruvarur Dist.
  • Mr. M. Mareeswaran has become a life member in ISTE.
  • Mr. M. Mareeswaran attended Ten days workshop on “Entrepreneurship” held at CED, Madurai during October 2010

2009

  • Mr. M. Mareeswaran attended two days National Seminar on “ANSYS” held at Mookambikai College of Engineering and Technology, Trichy during Sepember 2009.